New Roof Installation Romsey

Every roof covering has a working life, and once slates or tiles begin to fail faster than they can sensibly be replaced individually, renewal becomes the more economic course. A professional roof inspection measures how much service the slates, battens and fixings have left.

In Romsey’s historic core, roofs of hand-made clay tile and Victorian slate are frequently original, carrying ornamental ridge tiles that have outlasted more than one covering.

Where slates slip in numbers with no sign of breakage, the original nails have usually corroded through. The fixings have then reached the end of their life across the whole roof, and refixing slates individually cannot restore a slope whose nails are identical in age.

Slate reached Romsey with the railway, and the terraces roofed in it soon after were nailed within a few years of each other. Their fixings now tend to give out together.

Eventually each patch repair lasts a shorter period than its predecessor. The surrounding tiles and fixings deteriorate at the same rate as the fault being repaired. Where a slope has already received three or four repairs, we price renewal alongside the next one, so the two figures can be compared directly.

We see the same pattern on Romsey’s older cottages and terraces, where a patch to an ornamental ridge or a slipped tile is followed sooner each time by the next fault.

Many period roofs were built with no felt or membrane beneath the tiles, so a displaced tile admits rainwater and dust directly into the loft. A re-roof is the opportunity to lay breathable underlay across every slope, giving the loft a continuous secondary barrier for the first time.

Romsey’s older cottages and terraces were laid over open battens with nothing beneath them, so the membrane is set out over the rafters before the new battens are fixed.

Homes extended over the years often carry three or four roof coverings of different ages, each meeting the next at a junction that has to be flashed and maintained separately. Re-roofing brings the whole footprint under one covering, with every junction detailed to a single specification.

Test Valley’s own conservation guidance addresses alterations to the roof, including inserting dormers. So many Romsey houses have grown rear wings and dormers under a covering different from the main roof.

A director inspects the roof, the loft and the rainwater goods, then sets out the available options. Your written, itemised quote follows within 48 hours of the survey, with no hidden extras. Where the roof retains serviceable life, we quote for a repair instead.

A director brings samples to the property and holds them against the brickwork and the neighbouring roofs. Tile roofing in clay or concrete and natural slate are each specified for the building they are going on. The verge, ridge and eaves details follow the material.

A director confirms the start date and the specification in writing before any material is ordered. Scaffold and skip positions, parking and eaves protection are agreed around the household. The neighbours either side are notified when the noisiest stages occur.

One director remains your point of contact throughout, and the same team carries out the work from strip to completion. The team cleans the site each evening, reports progress at the end of each stage, and explains any weather decision immediately.

A director reviews the finished roof with you from ground level, verifying the ridge line, verges, flashings and gutter falls against the accepted quote. The documentation pack follows, setting out the completion record, the material specification and the aftercare a new roof requires.

We price a new roof from the measurements taken at the survey. The figure follows from the roof area, the pitch and the material specified. We also count the stacks and abutments requiring leadwork and record the condition of the battens and rafters beneath. Your written, itemised quote follows within 48 hours, set out line by line. The price for that scope is fixed before work begins, with no hidden extras.

Romsey’s older streets call for hand-made or sand-faced clay tile and, on the Victorian terraces, Welsh slate matched to the neighbouring roofs and their ornamental ridge tiles. Where that slate survives we install slate roofing to the same size and colour, and the newer housing at Cupernham, Halterworth and Abbotswood takes a modern interlocking concrete tile instead.

The quoted price covers the whole project in Romsey. It includes stripping the existing covering and laying a breathable roof underlay. New battens and stainless fixings, the tiles or slates, a dry ridge and verge and new lead flashings are inside that figure. We additionally remove all waste, clean the site daily and protect the driveway and garden. Rafter and purlin renewal is priced separately once the strip exposes the timber, and none proceeds without your agreement.

A new roof addresses several of the questions a buyer’s surveyor asks. The weathering layer is new throughout, the loft loses less heat once the underlay and eaves ventilation are adequate, and the roofline is straight again across the frontage. On Romsey’s Victorian terraces we re-set the original ornamental ridge tiles and set new clay or slate courses to the same size and gauge as the roof they join. We do not attach a figure to resale value, because no reliable one exists.

Telephone or use the contact form, and we will book a free survey conducted by a director at a time convenient for the household. We respond within 48 hours. The survey covers the roof, the loft and the rainwater goods, and the material options are explained at the property. The itemised quote follows within 48 hours of that visit, and we work across our Romsey service area.