Tile Roofing Romsey

A new slope has to match the elevation it joins. Where the original tiles are no longer manufactured, the choice lies between a sympathetic match on the new work and re-tiling the whole elevation uniformly. The abutment and valley detailing is priced alongside it.

Hand-made clay tile of the kind on Romsey’s oldest roofs is not always matched by current ranges, so a director settles the match at survey.

Both materials are appropriate on Hampshire properties. The pitch, the capacity of the rafters beneath, and the profiles already on the elevation determine the choice. We price slate roofing alongside the tile wherever either material is appropriate, so the comparison is made on figures.

Welsh slate arrived in Romsey with the railway and now sits alongside clay tile on the same terraced rows.

A re-tile is the point at which the ridge and verge specification is decided, because the team re-forms both junctions once the tiles are off. Dry-fixed systems remove bedded mortar from those junctions, and where the loft beneath requires ventilation, ridge vent installation is fitted within the same run.

Many Romsey terraces carry ornamental ridge tiles, and a director records the profile before the team lifts them.

A tile roof bought with the property carries no record of when it was laid, which underlay sits beneath it or how the verge and ridge were finished. Establishing that is the purpose of the survey, and it determines whether the roof warrants re-tiling now or monitoring for the present.

Buyers of Romsey’s Victorian terraces seldom receive a record of the last re-tile, so a director checks the underlay and the ridge bedding from the loft at survey.

Individual repairs remain appropriate until the roof as a whole reaches the same condition. After that point each repair refixes tiles onto battens as fatigued as the ones beside them. The next step is re-tiling the slope or a full roof replacement, and a director confirms which the property requires at survey.

Romsey’s Victorian terraces run in long unbroken slopes of Welsh slate, and a patched section stands out against the slate either side of it.

The first visit establishes which tile the elevation carries, the condition of the battens and underlay beneath it, and the capacity of the rafters. Where the question concerns the condition of an existing roof rather than its renewal, a roof inspection answers it first.

Within 48 hours you receive an itemised quotation naming the tile, the underlay, the battens and the ridge and verge junctions. Labour and waste removal are priced separately. There is no obligation and there are no hidden extras: the price you accept is the price you pay.

The access equipment stands clear of the driveway and the planting, and the ground beneath the eaves is sheeted. Deliveries are timed so that pallets do not stand longer than necessary, and anything stored in the loft is protected before the strip begins.

Our own team carries out the installation throughout, with no subcontracted labour. A director oversees the project and remains your single point of contact. The same schedule is followed on every slope, so the finished roof is consistent from eaves to ridge.

The team clears the gutters and valleys of debris from the installation and leaves the property as it was found. Surplus tiles from the same delivery remain with the household, and the documentation of the materials fitted is issued with the invoice.

Yes. The request is most common where one elevation has been patched repeatedly or is more exposed to driven rain than the others. The decision rests on whether the remaining slopes have reached the same condition. Where they have, re-tiling them in the same visit costs less than returning separately. Where they have not, we leave the serviceable slopes undisturbed. We then form the hip, ridge or valley junction so that the two generations of tile meet properly.

We remove everything stripped from the elevation. Salvageable tiles are set aside for re-laying or left with you, and the remainder is taken away. The property is swept at completion, and the skip is collected once the installation is finished. The terraced rows in the older part of Romsey have narrow frontages and roadside parking, so we agree where the skip stands before the installation is booked. On the outer roads the driveway beside the house takes the skip and the pallets. Where nowhere on the plot will accommodate a skip, we agree the position before the installation is booked.

Yes for anything above single storey. A full roof means loaded pallets, edge protection and the team working at the eaves and at the ridge. No ladder can support that safely. We price scaffolding within the itemised quotation rather than adding it afterwards. Where a bungalow slope or a low outbuilding is reachable from a tower instead, the quotation names the tower and prices it accordingly.

The battens and the roof underlay are renewed with the tiles. A director assesses the lead at the abutments and the valleys and allows for it within the quotation. Romsey roofs range from Victorian slate on battens with no underlay beneath to later roofs still on their first underlay. We will not quote for new tiles over battens or rafters that have reached the end of their service life.

With a telephone call or the contact form. A director attends to survey the roof, measure the slopes and establish what lies beneath the tiles. The written, itemised quotation follows within 48 hours, and the installation is booked for a time that suits the household. That is the same wherever you are across our Romsey service area.