Skylight Installation Totton

Misted glazing, a frame that no longer opens smoothly and spares that stopped being made are the usual signs a unit needs replacing. The existing kerb and opening are reused, so the replacement avoids the timber work of the first installation. Where the frame and seals can be saved instead, skylight repair is the better course, and we will confirm that.

Most units now due for replacement sit in the estates raised at West Totton through the 1980s and 1990s.

Water showing at the corner of a skylight indicates a failure in the lead and soakers around it more often than in the unit itself. We establish which has failed before recommending anything. Where the surround is at fault, roof flashing repair resolves it without a new unit. Where the unit has reached the end of its service life, we replace it.

At Eling, where nineteenth-century slate sits beside clay tile, the lead is inspected before the unit itself.

A single-storey extension places the centre of the room a long way from any window, and light levels fall noticeably towards the middle. A skylight set on a kerb in the felt above the working end lights it from directly overhead.

Rushington’s houses, among the first built after the First World War, extend readily at the rear, and the kitchen sits furthest from any window in the original plan.

With the covering off and the battens and underlay exposed, forming openings costs a fraction of what the same work costs on a finished roof. Homeowners planning a renewal increasingly add roof windows to the specification at the quotation stage.

The estates finished during Totton’s early 1950s expansion are now reaching the age for a full re-covering, and their owners are the ones asking about this option most.

The domes fitted to flat roofs decades ago discolour with age and retain very little heat. A modern flat skylight on a new kerb, with the felt or membrane dressed up to it, raises both the daylight and the thermal performance of the opening.

The prefabricated housing raised at Hounsdown for households displaced by wartime bombing carried flat roofs, and the domes added there over the years are now well beyond their working life.

A director attends to measure the opening and inspect the tiles, underlay, battens and rafters around it. The unit is then specified for both the room and the roof. Where a covering is failing as a whole, we set out roof replacement options before any cutting is priced.

Your written, itemised quote follows within 48 hours of the survey. It prices the unit, the access, the flashing kit and the internal making good separately. There is no obligation, and the price you accept is the price you pay.

We position dust sheets beneath the opening and clear the room with you before any cutting begins. The roof is left weathertight at the end of every working visit, with the battens and underlay kept dry. Every other room remains in use while the installation continues.

One team cuts the opening, trims the timbers where the survey requires it, and installs the unit. The flashing is then weathered into the surrounding tiles or slates. A director oversees the installation from the initial visit to completion.

The reveal is made good and left ready for decoration, and the glazing is left clean. A director inspects the flashing from the roof and the reveal from the room below. The handover documentation for the unit is provided in writing.

Three elements move the price more than anything else:

• The unit: its dimensions, its glazing, and whether it opens or is fixed
• The access: a tower beside the elevation, or scaffolding to the eaves
• The making good: the reveal, the plastering and the decoration around it

Those three are priced as separate lines, so nothing is combined into a single figure. There is no obligation and there are no hidden extras.

That is determined by the roof itself, not by a general policy. A single unit is frequently installed from a tower positioned at the eaves. Totton’s own planning evidence describes the town as suburban rather than urban, built out almost entirely as two-storey semis and terraces, and that stock suits tower access well. Taller or harder-to-reach properties are uncommon here, and where the survey finds one, scaffolding to the ridge is arranged instead. The survey establishes which, and the quote includes whatever access the installation needs, arranged and removed as part of the work.

We source and supply units matched to the roof and the room. A unit you have already purchased is installed wherever it is suitable for the opening. Where it is not, we will state that clearly before any cutting begins. Our own team then installs the unit, forms the kerb and weathers the flashing on every Totton installation, with no subcontracted labour.

Usually, provided the battens, underlay and rafters around the opening are sound. Totton is not a historic town: most of its housing dates from after the First World War, with clay tile and nineteenth-century slate confined to the older streets around Eling. Where the roof’s overall condition is in doubt, a roof inspection establishes what it can carry before any cutting begins. We will advise against opening a covering at the end of its service life.

Call us or complete the contact form. We respond within 48 hours. A director then attends to measure the opening, inspect the rafters around it and discuss what the room requires. The installation is scheduled for a date that suits you, and the unit is ordered as soon as you accept the quote. Wherever you are in our Totton service area, that director is your single point of contact throughout.