Wall Cladding Installation Totton

Where an extension is still under construction, we clad its new walls as their finished face. The team fixes the membrane, battens and boards to those walls in the same order as on any other wall we clad.

The Calmore estate was built to the north of the town in the early 1970s, and later housing has joined it to the rest of Totton.

Where a wall already carries cladding, the team removes every existing board and keeps none for reuse. Once the boards are off, the wall takes the membrane and battens in the same way as a wall that has never been clad. That job is a cladding replacement, and we clad the wall in full as a new installation. Replacing individual failed boards is the external cladding repair service and is not part of an installation.

Estates such as Rushington were completed during the 1950s.

The new cladding stops at a line beneath the eaves. The team cuts the top row of boards to that line and closes the top edge with a trim. A fascia or soffit at the eaves is part of the roof, and work to either of them is a roof fascia repair.

The houses at West Totton were built in the late 1980s and 1990s.

A director examines the masonry and any timber frame of each wall at the survey. Where a wall needs repair first, such as repointing, cracked brickwork or a decayed timber frame, the quote prices that work ahead of the cladding. The team completes it, including any carpentry the frame needs, before the membrane and battens are fixed.

River flooding from Bartley Water is a risk in Rushington and Eling, and flood water spreading from it wets the bottom of a wall first.

On a semi-detached pair or a terrace, the cladding stops at the line between your house and the next, and the team closes that edge with a trim.

Where a Totton home is one half of a semi-detached pair or part of a terrace, it shares a wall with the house next door. Across a large part of Totton the housing is suburban and low in density, and at Calmore, Eling, Ashurst Bridge and Netley Marsh it is more rural.

A director surveys each wall to be clad, measuring the elevation and assessing the wall behind its existing finish. We go through the board options with you at the property, including fibre cement cladding and uPVC wall cladding, and agree the board and its colour. The written, itemised quote is issued within 48 hours of that survey.

A director decides at the survey whether a tower scaffold or scaffolding serves each elevation. The method statement records each of those decisions, and it is agreed with you and signed before the team starts work.

The team fixes the breather membrane across each wall to be clad, then sets out the battens over it. Every batten is fixed through the membrane into the masonry or timber frame behind.

The team cuts each board to fit and fixes it to the manufacturer’s specification. Every corner and edge of the cladding is then finished with a trim.

A director inspects the finished cladding from the scaffold and from the ground. The team makes any minor adjustment the inspection identifies before leaving the site.

Yes. Cladding is fixed to the outside face of each wall, so the team works from the tower scaffold or scaffolding at that wall and not from inside the house. The team protects your driveway and planting around that access for the whole installation.

Some walls need repair before cladding, and a sound wall receives the battens in its current condition. A batten fixing carries the weight of the boards, so it can lose its hold in any part of the wall that is loose. Any repair is a separate item on your written quote, so you see that work and its price before you accept.

A little. The cladding brings the face of the wall forward, so each window sits deeper in its reveal. The team finishes every reveal with a trim cut to the window frame, closing the edge between the boards and the frame.

The choice is between a single elevation, an extension, a porch and the whole house. A director measures each wall you name at the survey, and the written quote itemises those walls.

One director. The same director surveys your walls, prepares the quote, agrees the access, oversees the team and inspects the finished cladding. Our own team carries out every stage of the installation, with no subcontracted labour.

Every project in our Totton service area begins with a free site survey conducted by a director. Your written quote follows within 48 hours of that survey.