Tile Roofing Basingstoke

Where a roof is stripped, we sort the tiles that come off and retain any that are sound for re-laying. Salvageable clay and concrete tiles are frequently re-laid on replacement battens and fresh underlay, with only the broken proportion made up from matching stock. A director establishes the salvageable quantity at survey.

Basingstoke’s older houses near the centre carry clay tiles the team can usually lift and re-lay on the same slope.

A re-tile is the point at which the ridge and verge specification is decided, because the team re-forms both junctions once the tiles are off. Dry-fixed systems remove bedded mortar from those junctions, and where the loft beneath requires ventilation, ridge vent installation is fitted within the same run.

Crested ridge tiles cap many of the older Basingstoke roofs, and the mortar bedding them faces the prevailing south-westerly wind.

Individual repairs remain appropriate until the roof as a whole reaches the same condition. After that point each repair refixes tiles onto battens as fatigued as the ones beside them. The next step is re-tiling the slope or a full roof replacement, and a director confirms which the property requires at survey.

Whole Basingstoke estate streets were tiled in a single phase, so the battens beneath them fatigue at the same rate.

Where a loft is to be converted, a room decorated beneath the slope or panels fitted over it, the tiles and the battens beneath them are the work that comes first. Re-tiling afterwards means opening the same slope twice and disturbing finishes only just completed.

Loft conversions and rear extensions are common across the Basingstoke estates, where the original interlocking tiles date from the 1970s and 1980s.

Both materials are appropriate on Hampshire properties. The pitch, the capacity of the rafters beneath, and the profiles already on the elevation determine the choice. We price slate roofing alongside the tile wherever either material is appropriate, so the comparison is made on figures.

Slate and clay tile sit on neighbouring roofs near the Basingstoke centre, the shallow pitches slated and the steeper ones tiled.

The first visit establishes which tile the elevation carries, the condition of the battens and underlay beneath it, and the capacity of the rafters. Where the question concerns the condition of an existing roof rather than its renewal, a roof inspection answers it first.

Within 48 hours you receive an itemised quotation naming the tile, the underlay, the battens and the ridge and verge junctions. Labour and waste removal are priced separately. There is no obligation and there are no hidden extras: the price you accept is the price you pay.

The access equipment stands clear of the driveway and the planting, and the ground beneath the eaves is sheeted. Deliveries are timed so that pallets do not stand longer than necessary, and anything stored in the loft is protected before the strip begins.

Our own team carries out the installation throughout, with no subcontracted labour. A director oversees the project and remains your single point of contact. The same schedule is followed on every slope, so the finished roof is consistent from eaves to ridge.

The team clears the gutters and valleys of debris from the installation and leaves the property as it was found. Surplus tiles from the same delivery remain with the household, and the documentation of the materials fitted is issued with the invoice.

Yes. The request is most common where one elevation has been patched repeatedly or is more exposed to driven rain than the others. The decision rests on whether the remaining slopes have reached the same condition. Where they have, re-tiling them in the same visit costs less than returning separately. Where they have not, we leave the serviceable slopes undisturbed. We then form the hip, ridge or valley junction so that the two generations of tile meet properly.

We remove everything stripped from the elevation. Salvageable tiles are set aside for re-laying or left with you, and the remainder is taken away. The property is swept at completion, and the skip is collected once the installation is finished. Most Basingstoke estate plots have a driveway and a garage, so the skip stands off the road, and the older terraces near the centre are loaded from the front boundary. Where nowhere on the plot will accommodate a skip, we agree the position before the installation is booked.

Yes for anything above single storey. A full roof means loaded pallets, edge protection and the team working at the eaves and at the ridge. No ladder can support that safely. We price scaffolding within the itemised quotation rather than adding it afterwards. Where a bungalow slope or a low outbuilding is reachable from a tower instead, the quotation names the tower and prices it accordingly.

The battens and the roof underlay are renewed with the tiles. A director assesses the lead at the abutments and the valleys and allows for it within the quotation. Basingstoke roofs range from Victorian slate on its original battens to estate roofs still on their first underlay. On the slated roofs the team probes the rafters once the battens are off and replaces any timber that has taken up damp. We will not quote for new tiles over battens or rafters that have reached the end of their service life.

With a telephone call or the contact form. A director attends to survey the roof, measure the slopes and establish what lies beneath the tiles. The written, itemised quotation follows within 48 hours, and the installation is booked for a time that suits the household. That is the same wherever you are across our Basingstoke service area.