Tile Roofing Farnborough

A re-tile is the point at which the ridge and verge specification is decided, because the team re-forms both junctions once the tiles are off. Dry-fixed systems remove bedded mortar from those junctions, and where the loft beneath requires ventilation, ridge vent installation is fitted within the same run.

Many Farnborough estate houses still carry the bedded ridge fitted when the roof was first laid, and the mortar there has never been renewed.

Individual repairs remain appropriate until the roof as a whole reaches the same condition. After that point each repair refixes tiles onto battens as fatigued as the ones beside them. The next step is re-tiling the slope or a full roof replacement, and a director confirms which the property requires at survey.

Farnborough’s post-war estate roofs were laid within a few years of one another, so the slopes on one house reach that condition together.

Where a loft is to be converted, a room decorated beneath the slope or panels fitted over it, the tiles and the battens beneath them are the work that comes first. Re-tiling afterwards means opening the same slope twice and disturbing finishes only just completed.

Loft conversions are frequent on the semi-detached houses of Farnborough, where the slope above the new room is renewed first, before any ceiling or insulation work begins below it.

Both materials are appropriate on Hampshire properties. The pitch, the capacity of the rafters beneath, and the profiles already on the elevation determine the choice. We price slate roofing alongside the tile wherever either material is appropriate, so the comparison is made on figures.

Slate and tile stand a short distance apart on the Victorian avenues, where later owners re-covered individual houses.

A roof is among the first elements a surveyor reports on, and an unresolved one is negotiated against the asking price. Re-tiling beforehand removes it from that discussion, and the ridge, verge and flashing details are documented with the rest of the quotation.

Farnborough’s post-war semi-detached and terraced houses reach the market with roofs of the same age and the same original underlay, so a surveyor treats the whole roof as one item.

The first visit establishes which tile the elevation carries, the condition of the battens and underlay beneath it, and the capacity of the rafters. Where the question concerns the condition of an existing roof rather than its renewal, a roof inspection answers it first.

Within 48 hours you receive an itemised quotation naming the tile, the underlay, the battens and the ridge and verge junctions. Labour and waste removal are priced separately. There is no obligation and there are no hidden extras: the price you accept is the price you pay.

The access equipment stands clear of the driveway and the planting, and the ground beneath the eaves is sheeted. Deliveries are timed so that pallets do not stand longer than necessary, and anything stored in the loft is protected before the strip begins.

Our own team carries out the installation throughout, with no subcontracted labour. A director oversees the project and remains your single point of contact. The same schedule is followed on every slope, so the finished roof is consistent from eaves to ridge.

The team clears the gutters and valleys of debris from the installation and leaves the property as it was found. Surplus tiles from the same delivery remain with the household, and the documentation of the materials fitted is issued with the invoice.

Yes. The request is most common where one elevation has been patched repeatedly or is more exposed to driven rain than the others. The decision rests on whether the remaining slopes have reached the same condition. Where they have, re-tiling them in the same visit costs less than returning separately. Where they have not, we leave the serviceable slopes undisturbed. We then form the hip, ridge or valley junction so that the two generations of tile meet properly.

We remove everything stripped from the elevation. Salvageable tiles are set aside for re-laying or left with you, and the remainder is taken away. The property is swept at completion, and the skip is collected once the installation is finished. Most Farnborough estate houses have a driveway wide enough for a skip, though the terraced streets nearer the centre offer kerbside parking only. Where nowhere on the plot will accommodate a skip, we agree the position before the installation is booked.

Yes for anything above single storey. A full roof means loaded pallets, edge protection and the team working at the eaves and at the ridge. No ladder can support that safely. We price scaffolding within the itemised quotation rather than adding it afterwards. Where a bungalow slope or a low outbuilding is reachable from a tower instead, the quotation names the tower and prices it accordingly.

The battens and the roof underlay are renewed with the tiles. A director assesses the lead at the abutments and the valleys and allows for it within the quotation. Farnborough roofs run from Victorian slate on battens with no underlay beneath to estate roofs still on their original underlay. Where the Victorian slate sits on bare battens, the team lays breathable underlay over the rafters before the new battens are fixed. We will not quote for new tiles over battens or rafters that have reached the end of their service life.

With a telephone call or the contact form. A director attends to survey the roof, measure the slopes and establish what lies beneath the tiles. The written, itemised quotation follows within 48 hours, and the installation is booked for a time that suits the household. That is the same wherever you are across our Farnborough service area.